Hi, check this out.
(1) Go to "Zones" and select the zone you want to monitor. Turn on "Valve Monitoring" and run the "Recalibrate" process to get the exact amperage value of the solenoid valve in the selected zone. Set your preferred percentage value for high/low current warning.
(2) Go to Settings > Events & Alerts > Alerts Settings > Solenoid Valve a nd click "+" to add monitoring.
(3) When an abnormality is detected in the amperage value, you will receive a notification through the app as follows:
- Open Line Error for Zone xx.
- Low Current Alert for Zone xx.
- Electrical Short Error for Zone xx.
- High Current Alert for Zone xx.
