24VAC Hardwiring

Elmo

Hi, I purchased the ImoLaza 8zone device to replace my old controller. With my old controller, I used hardwiring to supply power, and there isn't a nearby socket reserved for it. Currently, I'm planning to install the ImoLaza in the same location as the old controller. My question is whether I can still power the ImoLaza through hardwiring, using the 24 VAC two ports. Of course, if this is not feasible, setting up a new outlet is not a significant issue.

Joe

Woah, the board, old school, lol
Hardwiring is okay, the 24VAC terminals are for sensors, you can use them to power the controller though.

Imolaza

Joe Yes, exactly! Only if you don't have a sensor, just like the picture shows.

Simpsonknew everything

Imolaza I have a question. I was previously using a hardwired method to power the device, but accidentally damaged the 24vac - input. The threads are now completely stripped and can not be tightened. Are there any other methods I can use to provide power to the device?

Imolaza

Simpsonknew everything Not good. why don't you guys just use the adapter? Do you have a rain sensor?

Simpsonknew everything

Imolaza No, I don't have one. Does it matter? Do you need the wiring picture? Basically just the zone wires though.

Imolaza

Simpsonknew everything Then you can use the 24VAC+ and the COM terminal, that would work as well.

JCraig425

@"Simpsonknew everything"#p613I thought you knew everything.

Simpsonknew everything

JCraig425 Good one.

Simpsonknew everything

Sounds interesting.
I will try it.

Imolaza

Simpsonknew everything

Imolaza Thanks

ImoLaza

Product

Imolaza App

Support

Community

Contact Us